Stalling Machine image

The RightSight

$389

Complete package with shades and iris.

​The Rightsight, a 30mm front sight, was developed for high power rifle competition to have simply the best possible sight picture allowed by iron sight rules.

The Rightsight complete package comes with an adjustable iris made by Gehmann. They are available in 3 sizes,  2.9mm – 4.9mm, 4.0mm – 6.0mm and 5.0mm-7.5mm.

The Rightsight also includes a 30mm, .5 Crizal Alize anti-reflective lenses, the most reliable and technologically advanced protection against visual distractions caused by unwanted light reflections, scratches and smudges. These lenses have been ground on optical center to fit the sight barrel. The lens is indexed so when you take the lens out for cleaning it should have no effect on your zeros.

The Rightsight base has been designed to allow you to have the sight as low as possible for conventional rifles. This keeps your cheek-piece and position about the same as other sighting systems. The base is adjustable in approximate 5 to 6 minute steps depending on your sight radius (one notch equals two revolutions on a Warner rear sight). It also has index marks so you can tell where you are at any time. There should be enough adjustment so you can get the best head position on your gun and keep it there by making the big adjustments from yard line to yard line with the front sight and fine tune with the rear. There are three stem lengths. The standard stem (short) is most common  for conventional rifles, the tall stem is most common for Space guns and the T2K. A medium stem is available for some smallbore applications and low mounted rear sights on space guns.

The advantages of the Rightsight are:
  • Quality of the .5 lenses, it is far better anything available in 22 or 18 mm
  • Light collection, you see things better
  • Fixed level inside the tube along with your number board while you’re on target.
  • The Gehmann adjustable iris is the same as the 520 in a larger frame.
  • The elevator system has .050″ notches so there is not too much movement on the rear sight and cheek-piece.
 
The Rightsight - Complete
$389
  • Rightsight body with fixed level
  • Gehmann adjustable iris
  • .5 lens
  • Shades
  • Standard base (.750 or .812)
  • Stem (choose the height you need)
    • standard: 1.2 – 1.75
    • medium: 1.45 – 2.3
    • tall: 2.15 – 3.1
The Rightsight - Basic
$175
  • Rightsight body with fixed level
  • Gehmann adjustable iris
  • .5 lens
  • Shades
  • Standard base (.750 or .812)
  • Stem (choose the height you need)
    • standard: 1.2 – 1.75
    • medium: 1.45 – 2.3
    • tall: 2.15 – 3.1
30mm Gehmann Adjustable Iris
$185
522-30 Gehmann Iris
$190

Iris foresight, threaded 1 ¼” x 28, appears as a perspex element

"The Floating Doughnut"

  • 2.9mm-4.9mm
  • 4.0mm-6.0mm
  • 5.0mm-7.5mm
Standard Base
$60

You can get bases for each of your rifles and move the sight from rifle to rifle without losing your zero. Available in .750 or .812.

Tall Base
$75

The tall base is for use on a Tubb style gun or space gun when you have a standard height Rightsight. This way you can use the same sight on both conventional and space guns.

Fullbore Base
$60

This base is for shooting Fullbore with a 308 Win, using a 155 grain bullet. It has yard-line marks from 300 to 1000 yards. If you sight in your gun at 300 yards and move the sight to 800 yards you will hit the black without moving your rear sight. You will still need to fine tune with your rear and keep zeros but you will be on paper.

Jumbo Base
$75
A larger version of the standard clamp style base. This base is custom cut to accommodate your barrel or bloop-tube from .875 to 1.050  Call with your requirements and I'll make a base to match if I don't have your size in stock. This base can be substituted for the standard base in a sight package for $15 extra.
Dovetail Base
$60
New design will fit standard dovetail or 11mm Anschutz rail. Recommended for smallbore only.
Rain Shade (front)
$45

Protects the Rightsight lens from rain drops. The rain shade contains transparent disks with openings concentric with the aperture. You might get a rain drop on one of the transparent disks but you shouldn't get a rain drop on the aperture area of the lens. Your view through the aperture and the center of the lens remains unobstructed.

Lens Retainer Cap
$20

This base is for shooting Fullbore with a 308 Win, using a 155 grain bullet. It has yard-line marks from 300 to 1000 yards. If you sight in your gun at 300 yards and move the sight to 800 yards you will hit the black without moving your rear sight. You will still need to fine tune with your rear and keep zeros but you will be on paper.

Sun Shade (front)
$20
A larger version of the standard clamp style base. This base is custom cut to accommodate your barrel or bloop-tube from .875 to 1.050  Call with your requirements and I'll make a base to match if I don't have your size in stock. This base can be substituted for the standard base in a sight package for $15 extra.
Sun Shade (rear)
$20
Lens
$65
The Cant Adjustable Rightsight
$35 extra

This feature is an extra and should be noted when ordering. Cost is 35.00 for this option. For those of you who already own a Rightsight  we can change your sight to a cant adjustable sight. Call for details.

 
Level adjustment instructions
The sight is sent out with the level set so when the gun is straight up the level should be very close to center. You should install the sight so the stem is on the same vertical plane as the rear sight. This being accomplished get into position with the gun and get comfortable. Take note of where the level bubble is and how much the sight tube should be rotated. Loosen the two screws that hold the sight barrel to the stem and rotate to your approximate setting. Get back into position and check to see were the bubble is. Continue this until you are happy that the sight is where you need it to be. When completed you will need to Loctite the two screws. Use red if you have it, blue should work also. Remove only one screw at a time to apply Loctite. When you tighten the screws don't get all King Kongish, they are 6-32 screws into brass. Good and snug is enough. If you have any questions please don't hesitate to call.
 
 
For ordering information, contact us.